Adhesive Terms, Explained

Adhesive Terms

Share This Post

Common Adhesive Terms, Explained

There are so many adhesive terms floating around out there – you’ve probably heard them all but don’t know what half of them mean. So…we present to you, our all-inclusive list of adhesive terms and definitions! If there’s anything you think is missing, let us know!

CA-Compliant: The product has low or 0-VOCs, and does not exceed California’s VOC limits

Cure time: The length of time it takes and adhesive to cure, or dry

Double-sided: A tape or a surface with 2 coatings of adhesive (learn more about 2-part vs single-part)

Elongation: The distance an adhesive/tape will stretch before it breaks

Fixture time: The time required for an adhesive to develop handling strength

Flammable: Something that can be set fire to, or that would have flammable vapors (flammable adhesives are no longer flammable once dry)

Flash time: The length of time needed before another coat of adhesive can be applied or the surface can be bonded

Gel time: The length of time it takes until an adhesive is no longer workable

Green strength: The early development of bond strength after an adhesive or tape has been applied, before it reaches full strength

HAPs: Hazardous Air Pollutants

LEED: Leadership in Energy and Environmental Design, an internationally recognized green building certification system

Moisture-cure: When something requires the presence of moisture in the atmosphere to cure

Non-flammable: The opposite of “flammable” – something that cannot be set fire to, or has no flammable vapor (learn more about non-flammable adhesives)

Open time: The length of time during which an adhesive is considered workable – it is during this time that the surfaces can be bonded

Peel strength: The average force required to part two bonded materials, by pulling them back in a peeling motion (learn about adhesive strength tests)

Plasticizers: Materials that are added to a raw polymer to increase the flexibility and decrease the brittleness of the product (learn more about plasticizers)

PSA: Pressure Sensitive Adhesive (learn more about PSA’s)

PSI: Pounds per Square Inch

SDS: Safety Data Sheet (Learn how to read your SDS)

Shear strength: The load that a material is able to withstand in a direction parallel to the face of the material (learn about adhesive strength tests)

Shelf life: The length of time for which an adhesive/tape remains usable

Shore hardness: The amount of hardness, or resistance to indentation, that a material has

Single-sided: A tape or a surface with 1 coating of adhesive

Skin time: The length of time after an adhesive has been applied, to when the outermost layer has cured enough to form a “skin”

Solids content: The amount of base product (proportion of non-volatile material) left in the adhesive once the solvent has vaporized (learn more about solids content)

Specific gravity: The ratio of the density of an adhesive to the density of water

Surface prep: The process of getting materials ready to bond (learn more about the importance of surface prep)

Tack: How quickly a bond is produced after applying an adhesive

Tensile strength: The resistance of a material to breaking under tension, while an axial stretching load is applied (learn about adhesive strength tests)

Thixotropic: Having a viscosity that decreases, or becomes more liquid, when a stress such as shaking or stirring is applied

UV cure: When something requires UV (ultraviolet) light to cure

Viscosity: The measure of an adhesives’ ability to resist flow, often referred to as the “thickness” of an adhesive

VOC: The definitions of VOC is Volatile Organic Compound

Work time: The amount of time an adhesive is considered “workable”, which is the time between when an adhesive has set and when it will no longer bond

And there you have it, your all-inclusive list of adhesive terms and definitions! Are there any words we missed? Let us know, and we’ll update this list!

Have Questions and want to know more?

We would love to hear from you!

More To Explore


Forza’s OS24 Adhesive: Product Spotlight

OS24 is a unique adhesive formula that combines the best of both worlds: strength and safety. Unlike traditional adhesives that use harmful chemicals and release volatile organic compounds (VOCs) into the air, OS24 uses a water-based, non-toxic formula that is free from hazardous chemicals. This makes it safer for workers to handle, reduces the risk


Advantages of MS Sealants vs Traditional Urethane & Silicone Sealants

Forza Company’s MS Sealants offer a variety of benefits over traditional urethane and silicone sealants, making them the ideal choice for a wide range of applications. In addition to superior performance characteristics, MS Sealants also provide a safer and more environmentally friendly solution for workers and building occupants. When it comes to performance, Forza’s MS

Scroll to Top