skip to content

C-C360 – HIGH-TEMP NEOPRENE CONTACT ADHESIVE

Description

Description

ForzaBOND™ C-C360 is flammable, high-performance, neoprene contact adhesive.

Applications

ForzaBOND C-C360 is a flammable neoprene contact adhesive designed specifically for:

  • Vinyl and rubber flooring in high-traffic areas
  • Wall paneling and cladding
  • Countertop lamination
  • Roofing applications
  • Bonding membrane materials in flat roofing
  •  

Benefits

  • Excellent Weather Resistance
  • Excellent Coverage
  • Post formable
  • High-temperature resistance
  • 80% of final strength achieved upon bonding
  • Full strength achieved in 24 hours
  • Fast drying
  • No ODS (Ozone Depleting Substances)
  • No chlorinated solvents
  • Sprayable/Rollable/Brushable

How to Use

  • Be sure all surfaces are clean and free of grease, dirt, dust, etc. Apply to both surfaces to be bonded.
  • Adhesive should be applied to each surface, allowed to dry (until non-transferable to finger), then bonded under pressure.
  • When brushing, multiple coats may be required on porous surfaces.
  • When spraying, use of DeVilbiss JGA with FX tip and needle or Binks 2001 or 95 gun and 63B tip 2nd needle or similar equipment is satisfactory.
  • Apply pressure with a hand laminate roller or nip roller. If adhesive is left to dry for over 30 minutes, parts should be re-coated.
  • Normal courage required with web spray pattern is approximately 80%. The initial bond is strong enough to allow cutting or trimming immediately although ultimate strength is achieved in approximately 24 hours.
  • Store away from heat, flames, or other sources of ignition. If the spray tip clogs unscrew the spray tip from the gun and clean with a solvent such as lacquer thinner or acetone.
  • Do not use a pin on the spray tip orifice.

Sizing

  • 1 Gallon Can
  • 5 Gallon Pail
  • 52 Gallon Drum

NEED MORE INFORMATION FAST

Request Product Quote

Need Faster Information? Give us a Call!