Description
Description
ForzaBOND™ C-C551 is flammable, high-performance, spray contact adhesive.
Applications
ForzaBOND C-C551 is a non-flammable, high-performance spray contact adhesive specifically designed for:
- Wall coverings
- Countertop bonding in cabinet manufacturing
Benefits
- Non-Flammable
- High Coverage
- Over 220ºF (105ºC) temperature resistant
- 80% of final strength achieved immediately; full strength achieved in 24 hours
- Fast drying with long open time
- No ODS (Ozone Depleting Substances)
- VOC Free
- Qualifies for LEED-NC & CI EQ Credit 4.4: laminating adhesives shall contain no urea formaldehyde resins
How to Use
- Be sure all surfaces are clean and free of grease, dirt, dust, etc. Apply to both surfaces to be bonded.
- Adhesive should be applied to each surface, allowed to dry(until non-transferable to finger), then bonded under pressure.
- When brushing, multiple coats may be required on porous surfaces.
- When spraying, use of DeVilbiss JGA with FX tip and needle or Binks 2001 or 95 gun and 63B tip 2nd needle or similar equipment is satisfactory.
- Adhesive should be applied at a minimum of 2.0 dry grams per square foot. Apply pressure with a and laminate or nip roller.
- Normal coverage required with web spray patten is approximately 80%. Initial bond is strong enough to allow cutting or trimming immediately although ultimate strength is achieved in approximately 24 hours.
- Store away from heat, flames, or other sources of ignition. If spray clogs unscrew the spray tip from the gun and clean with a solvent such as lacquer thinner or acetone.
- Do not use a pin on the spray tip orifice.
Sizing
- 1 Gallon Can
- 5 Gallon Pail
- 52 Gallon Drum
