Description
Description
ForzaBOND™ C-R552 is a two-part modified epoxy adhesive with moderate cure and a wide range of purposes.
Applications
ForzaBOND™ C-R552 is specially designed as a high-speed two-component sealant where rapid curing is necessary or deep joints are present, including:
- Joint sealing in precast concrete applications
- Crack filling and repairing in concrete applications
Benefits
- Semi-Flexible
- Generates no heat
- No Solvents or Isocyanates
- 1:1 ratio, easy mixing/dispensing
- Minimal Surfaces preparation required
- -75ºF to 400ºF service temperature
- Retains flexible bond line, outperforms most “brittle” two part adhesives
- Light stable and UV resistant
- Paintable
- 0 VOC
- 100% solids no shrinking
- Easily bonds dissimilar material
How to Use
- For cartridges: ensure flow from both sides of cartridge is possible, attach static mixer and gun out material.
- Apply mixed adhesive to one surface to be bonded then mate second surface.
- Surfaces should be clean and dry and in most cases no abrasion or solvent wipe is necessary.
- Note: The B side will stiffen at temperatures below 32ºF/0ªC. The material may have to be heated to return to usable viscosity.
- For bulk: Ensure flow from both drums and in both hoses. Attach static mixer and gun out adhesive as desired.
- Apply to one surface to be bonded, then mate the second surface.
- Surfaces should be clean and dry.
- Use abrasive or solvent wipe only if necessary.
- Clean up with mineral spirits/wet rag.
Sizing
- 400ml Cartridge
- 5 Gallon Pail
- 52 Gallon Drum