Description
Description
ForzaBOND™ M-C280 is a neoprene contact adhesive.
Applications
ForzaBOND is specifically designed for laminating and general bonding to substrates in the Marine industry. Laminates and bonds a wide variety of materials including:
- Headliners
- Dashboard covers
- Vinyls
- HPL (High Pressure Laminate)
Benefits
- Excellent Coverage
- Fast Drying
- Excellent Temperature Resistance
- 80% of final strength achieved upon bonding
- Full strength achieved in 24 hours
- Fast drying
- No ODS (Ozone Depleting Substances)
- No chlorinated solvents
- Sprayable/Rollable/Brushable
How to Use
- Be sure all surfaces are clean and free of grease, dirt, dust, etc.
- Apply to both surfaces to be bonded by brushing, rolling, or spraying.
- Adhesives should be applied to each surface, allowed to dry (until non-transferable to finger), then bonded under pressure.
- When brushing, multiple coats may be required on porous surfaces
- Adhesive should be applied at a minimum of 2 dry grams per square foot.
- Apply pressure with a hand laminate roller or nip roller.
- Bonds should be made as soon as practical, if adhesive is left to dry for 30min, parts should be re-coated.
- Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in approximately 24 hours.
- Store away from heat, flames, or other sources of ignition.
Sizing
- 1 Gallon Pail
- 5 Gallon Pail
- 55 Gallon Drum
Colors
- Amber
Recommended Cleanup
- Mineral Spirits
- Organic Solvents
