Description
Description
ForzaBOND™ M-R445 is a two-part modified epoxy adhesive with moderate cure and wide range of applications.
Applications
ForzaBOND M-R445 is specifically designed to eliminate exothermic reaction issues common with composite materials. It bonds similar materials while generating no head during curing, resulting in no gel coat “witness marks”.
Benefits
- Semi-Flexible
- Generates no heat while curing
- No solvents or isocyanates
- 1:1 ratio, easy mixing or dispensing
- Minimal surface preparation required
- -75ºF to 400ºF service temp
- Retains flexible bond line, outperforms most “brittle” two part adhesives
- Light stable and UV resistant
- Paintable
- 0 VOC
- 100% solids no shrinking
- Different cure speeds available
- No Odor
- 100% solids no shrinking
- Bonds easy dissimilar material
How to Use
- A two-part 1:1 mix ratio that is available in dual cartridges or bulk.
- For cartridges: ensure flow from both sides of cartridge is possible, attach static mixer and gun out material.
- Apply mixed adhesive to one surface to be bonded and then mate second surface
- Surfaces should be clean and dry and in most cases no abrasion or solvent wipe is necessary.
- Note: The B side will stiffen at temperatures below 32ºF/0ºC. The material may have to be heated to return to usable viscosity.
- For bulk: Ensure flow from both drums and in both hoses. Attach static mixer and gun out adhesive as desired.
- Apply to one surface to be bonded, then mate the second surface.
- Surfaces should be clean and dry.
- Use abrasive or solvent wipe only if necessary.
- Clean up with mineral spirits/wet rag.
Sizing
- 400ml Cartridge
- 52 Gallon Drum
- 5 Gallon Pail
