Description
Description
ForzaBOND™ M-R478 is a two-part methacrylate adhesive designed to bond a wide range of substrates.
Applications
ForzaBOND M-R478 bonds engineered thermoplastics, thermosets, composites, rubbers, and metals without the need for surface preparation, primers, or chemical wipes. Ideally suited for structural applications including.
Benefits
- Excellent bond strength
- Impact and weather resistant
- Excellent bonding to a large variety of substrates
- 1:1 ratio – easy mixing or dispensing
- Minimal surface preparation required
- Forms tough, high-strength, high impact resistant bonds
- Resists most common industrial cleaners, fuels, lubricants, and environmental conditions
- Retains bond in strength in boiling water, salt water, salt fog, kerosene, gasoline, diesel fuel, antifreeze, hydraulic fluid, and cutting oils.
How to Use
- A two part 1:1 mix ratio that is available in dual cartridges or bulk.
- When using cartridges, ensure flow from both sides of cartridge dispenser; attach static mixer and gun out material.
- After adhesive is mixed apply it to one surface to be bonded then mate the second surface.
- Surfaces should be clean and dry and in most cases no abrasions or solvent wipe is necessary.
- You have only 3-4 minutes to put parts together. Hold parts in position while curing (pressure clamping is not required)
- At room temperature handling strength is achieved at 7-10 minutes and in full cure in 2-3 hours.
Sizing
- 400ml Cartridge
- 50ml Cartridge
- 52 Gallon Drum
- 5 Gallon Pail