Description
Description
ForzaBOND™ T-C222 is flammable, high-performance, neoprene industrial contact adhesive.
Applications
ForzaBOND® T-C222 is designed for laminating and general bonding to substrates. Laminates and bonds a wide variety of materials.
Benefits
- Post formable
- Excellent coverage
- High-temperature resistance
- 80% of final strength achieved upon bonding
- Full strength achieved in 24 hours
- Fast drying
- No ODS (Ozone Depleting Substances)
- No chlorinated solvents
- Sprayable/Rollable/Brushable
How to Use
- Be sure all surfaces are clean and free of grease, dirt, dust, etc. Apply to both surfaces to be bonded.
- Adhesive should be applied to each surface, allowed to dry(until non-transferable to finger), then bonded under pressure.
- When brushing, multiple coats may be required on porous surfaces.
- When spraying, use of DeVilbiss JGA with FX tip and needle or Binks 2001 or 95 gun and 63B tip 2nd needle or similar equipment is satisfactory.
- Apply pressure with a hand laminate roller or nip roller. If adhesive is left to dry for over 30 minutes, parts should be re-coated.
- Normal courage required with web spray pattern is approximately 80%. The initial bond is strong enough to allow cutting or trimming immediately although ultimate strength is achieved in approximately 24 hours.
- Store away from heat, flames, or other sources of ignition. If the spray tip clogs unscrew the spray tip from the gun and clean with a solvent such as lacquer thinner or acetone.
- Do not use a pin on the spray tip orifice.
Sizing
- 1 Gallon Can
- 5 Gallon Pail
- 52 Gallon Drum
