Description
Description
ForzaBOND™ T-C485 is a high-performance neoprene contact adhesive with good initial tack, and high heat resistance.
Applications
ForzaBOND® T-C485 bonds leather, veneer, fabric, upholstery, foam, wood, rubber, plastic, laminate, melamine, metal, cork, fiberglass, and many plastics.
Benefits
- Excellent coverage
- Excellent green strength
- High-temperature resistance
- Fast, high tack
- 80% of final strength achieved immediately, full strength achieved in approximately 24 hours
- Fast drying
- Sprayable
- Ideal for aircraft applications
How to Use
- Be sure all surfaces are clean and free of grease, dirt, dust, etc.
- Apply to both surfaces to be bonded by brushing, rolling, or spraying.
- Adhesive should be applied to each surface, allowed to dry (until-non transferable to finger), then bonded under pressure.
- When brushing, multiple coats may be required on porous surfaces.
- When spraying, use of DeVilbiss JGA with FX tip and needle or Binks 2001 or 95 gun and 63B tip 2nd needle or similar equipment is satisfactory.
- Adhesive should be applied at a minimum of 2 dry grams per square foot.
- Apply pressure with a hand laminate roller or nip roller.
- Bonds should be made as soon as practical.
- If adhesive is left to dry for over 30 minutes, parts should be re-coated.
- Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in approximately 24 hours.
- Store away from heat, flames or other sources of ignition.
Sizing
- 1 Gallon
- 55 Gallon Drum
- 5 Gallon Pail
