Description
Description
ForzaBOND™ T-R679 is a two-part modified epoxy adhesive with moderate cure and a wide range of purposes.
Applications
ForzaBOND® T-R679 is ideal for the structural bonding of metals and various other materials in panel assembly. It is also suitable for the structural bonding of wood, ceramics, composites, concrete, and FRP as well as combinations of these materials where a flexible bond line is desired.
Benefits
- 1:1 ratio, easy mixing/dispensing
- Minimal surface preparation required
- -75ºF to 400ºF service temp
- Retains flexible bond line, out performs most “brittle” two part adhesives
- Light stable and UV resistant
- Paintable
- 0 VOC
- Generates no heat
- 100% solids no shrinking
How to Use
- Is a two-part 1:1 mix ratio that is available in dual cartridges or bulk.
- For cartridges: ensure flow from both sides of the cartridge is possible, attach static mixer and gun out material.
- Apply mixed adhesive to one surface to be bonded then mate with second surface.
- Surfaces should be clean and dry and in most cases no abrasion or solvent wipe is necessary.
- Note: The B side will stiffen at temperatures below 32ºF/0ºF. The material may have to be heated to return to usable viscosity.
- For bulk: Ensure flow from both drums and in both hoses. Attach static mixer and gun out adhesive as desired.
- Apply to one surface to be bonded, then mate the second surface.
- Surfaces should be clean and dry.
- Use abrasive or solvent wipe only if necessary.
- Clean up with mineral spirit/wet rag.
Sizing
- 400ml Cartridge
- 5 Gallon Pail
- 52 Gallon Drum
