skip to content

TAC-734G WEB SPRAY HIGH TACK INFUSION MOLDING ADHESIVE

Description

Description

ForzaBOND™ TAC-734G is a web spray adhesive tackifier specifically designed to be compatible with resins used in the infusion molding RTM & LRTM process.

Applications

ForzaBOND™ TAC-734G is a infusion molding adhesive that is specifically formulated to overcome the problems normally associated with using othe types of adhesives, such as bonding failure, resin blockage, and surface defects in the finish product.

  • RTM
  • LRTM
  • Vacuum Infusion

Benefits

  • Single sided glue application even on heavy fiberglass mats
  • Safely fuses laminating materials to structural core surfaces
  • Ultimately becomes part of the polymer matrix
  • Very fast application
  • Convenient, reliable, portable, spray system
  • Provides superior holding during forming process
  • Allows resin to obtain maximum tensile strength
  • Will not interfere with the curing process of vinyl ester, polyesters, or styrene safe

How to Use

  • Designed as a portable, self-contained spray system for field or shop applications.
  • Be sure all surfaces are clean and free of grease, dirt, dust, etc.
  • Apply adhesive at 80% to 100% coverage.
  • Allow enough time (2-4 minutes or until dry to the touch) for the adhesive to become tacky before bonding.
  • Parts should be mated with as much pressure as practical.
  • Normal coverage required with web spray pattern is approximately 80%; however, porous surfaces may need a second coat.
  • Initial bond is strong enough to allow cutting or trimming immediately, although ultimate strength is achieved in approximately 24 hours.

Sizing

  • 13oz Aerosol Can
  • 22L Disposable Canister
  • 108L Returnable Canister

NEED MORE INFORMATION FAST

Request Product Quote

Need Faster Information? Give us a Call!