Description
Description
ForzaBOND™ TAC-739R is a mist spray adhesive tackifier specifically designed to be compatible with resins used in the infusion molding RTM & LRTM process.
Applications
Temporarily bonds & fixtures materials including:
- Fabric matting
- Reinforcing materials
Compatible with:
- Vinyl Ester
- Polyester
- Styrene Resins
Benefits
- High Track Formation
- Designed to not interfere with curing process of vinyl ester, polyester, and styrene resins
- Tackifier Resin, engineered to dissolve and become part of polymer matrix
- Does not act as a contaminate to most resins
- Helps improve overall strength of composite structures by eliminating wet out (uncured resin pockets)
- Ultra efficient portable low maintenance spray system (requires no external air sources)
How to Use
- Apply a thin layer of TAC-739R onto the intended bonding surfaces.
- Let adhesive flash and become tacky to touch.
- Apply fabric materials, fabric should hold in place.
- Recommended operating temperatures range between 60° F and 100° F. Store the canister system in a warm environment.
- In the event of cold weather or if canister becomes cold, and gives an inconsistent spray pattern, it’s suggested that the canister be warmed. Best practice is submersing the canister in warm water or using an electric heating blanket that can be purchased from Forza.
- Important: Do not store at temperatures exceeding 120°F.
Sizing
- 13oz Aerosol Can
- 22L Disposable Canister
- 108L Returnable Canister