ForzaBOND™ R519 is a 2-part methacrylate adhesive designed to bond a wide range of substrates.


  • Bonds engineered thermoplastics, thermosets, composites and metal structural elements together in any combination
  • Bonds a wide variety of rubber materials
  • Bonds a vast range of metals where surface preparation, primers or chemical wipes are not generally required
  • Also bonds composites and many other substrates


  • Excellent bonding to a wide variety of substrates
  • 1:1 ratio – easy mixing or dispensing
  • Minimal surface preparation required
  • Excellent bond strength
  • Forms tough, high strength, high impact resistant bonds
  • Resists most common industrial cleaners, fuels, lubricants and environmental conditions
  • Impact and weather resistant
  • Retains bond strength in boiling water, salt water, salt fog, kerosene, gasoline, diesel fuel, antifreeze, hydraulic fluids and cutting oils

How to Use

  • Forzabond® R519 is a 2-part 1:1 mix ratio that is available in dual cartridges or bulk.
  • When using cartridges, ensure flow from both sides of cartridge dispenser; attach static mixer and gun out material.
  • After adhesive is mixed apply it to one surface to be bonded then mate the second surface.
  • Surfaces should be clean and dry and in most cases no abrasion or solvent wipe is necessary.
  • You have only 3-4 minutes to put parts together. Hold parts in position while curing (pressure clamping is not required).
  • At room temperature handling strength is achieved at 7-10 minutes and full cure in 2-3 hours.


  • 50 ml Cartridge
  • 400 ml Cartridge
  • 5 Gallon
  • 52 Gallon Drum


Request Product Quote

Need Faster Information? Give us a Call!

Scroll to Top