Adhesive Spray Issues: Canister Tips & Solutions

Canister System Tips & Tricks Series, Part 1: Understanding Strange Spray Patterns

The canister system is highly efficient for adhesive applications, yet occasional mishaps occur. This article is part of a series aiming to highlight common industry errors and offer solutions to avoid them.

Identifying Adhesive Spray Issues

Are you experiencing peculiar adhesive spray patterns? Do you notice tails, unevenness, a lack of pattern, or sporadic spraying? These issues might stem from various mistakes in the application process.

Troubleshooting Techniques

1. No Pattern or Uneven Spray:

   • Check the front end of your gun to ensure a spray tip is correctly installed.
   • Unclean or clogged tips may cause uneven patterns. Remove the tip, clean it using a mild solvent, and ensure the orifice is free from debris. Replace with a new tip if necessary.

2. Tails in Spray Patterns:

   • Heavy coverage at the top and bottom of the spray with a gap in the middle suggests excessive adhesive flow.
   • Adjust the nut behind the trigger to reduce the flow if there’s an overload.

3. Spluttering Spray:

   • Cold temperatures can lead to spluttering spray. Move the canister to a warmer area, ensuring the temperature is above 60°F (15°).
   • Gently agitate the canister to bring the adhesive back into a workable solution.

Preventive Measures

Maintaining the right environment for canisters is crucial to prevent such issues:

• Store canisters in a warmer area, away from the floor, using pallet racking, carts, or heated blankets to maintain optimal temperatures.

Seeking Further Assistance

If these troubleshooting tips don’t resolve the problem or if you have additional questions, don’t hesitate to contact us. We’re here to provide expert guidance and support in resolving adhesive spray issues.