What are acrylic adhesives, and how do they work? Acrylic adhesives are structural adhesives that use acrylic resins as the base. There are numerous types of acrylic adhesives, but the uniting feature is that they all cure when exposed to air. Once exposed to air, they crosslink and change state to form a strong bond that can’t […]
What are rubber-based adhesives, and how do they work? Rubber-based adhesives are adhesives that use rubber resin to make up the solids content, and contain tackifying resins as well as other specialty performance additives. Typically, they work by contact bonding, meaning you apply the adhesive to both surfaces and the adhesive is bonded to itself, taking
Rubber-Based Adhesives Read More »
What Are Contact Adhesives, and How do They Work? Contact adhesives (aka contact cement), are adhesives that bond on contact with a substrate. The adhesive is applied to both substrates, and then mated together using pressure to form a strong, permanent bond. What are the difference between contact adhesives and PSA’s? You can learn more
What Are PSA’s (Pressure Sensitive Adhesives), and How do They Work? PSA’s are pressure sensitive adhesives, and as the name suggests, they need pressure to form their bond. Unlike reactive adhesives which need a catalyst to cure, PSA’s provide immediate adhesion and remain permanently tacky once applied. What are the different types of PSA’s? Acrylic
Pressure Sensitive Adhesives Read More »
Consulting con·sult·ing /kənˈsəltiNG/ Adjective Engaged in the business of giving expert advice to people working in a professional or technical field. At Applichem, we don’t have salespeople, we have adhesive consultants. And at Applichem, you’re not just a customer, you’re an ally. We aim to be an adhesive & tape ally to each and every one
Business Consulting Services Read More »
How do PUR Hotmelt Adhesives Work? PUR adhesives are reactive polyurethane hot melt adhesives. They are one-part synthetic specialty adhesives with the strength of structural adhesives, but with the application speed of hotmelts. Similar to regular hotmelts, PUR adhesives are heated until they reach a liquid state, applied to your substrates, and the bond is created as
PUR Hotmelt Adhesives Read More »
Deciding Between Urethane and MS Polymer Sealants: The Pros and Cons When it comes to sealants, two popular options are urethane and MS polymer. While both are used for bonding and sealing applications across various industries, there are some key differences between the two. Urethane-based sealants are known for their good tooling properties, but they
Deciding Between Urethane and MS Polymer Sealants: The Pros and Cons Read More »
What does “solids content” mean? Solids content is a term often used when discussing adhesives, particularly solvent-based adhesives, where the solvent serves as a carrier for the solid/non-volatile content. So what does the term “solids content” refer to? “Solids content” refers to the amount of base product (proportion of non-volatile material) left in the adhesive
What is Solids Content? Read More »
Industrial adhesive users – do you know how to read your SDS? At last, here is your all-inclusive guide to reading your SDS, or Safety Data Sheet! If you’re looking for a more general guide of adhesive terms, check out our adhesive terms glossary! For quick reference, basic product information can be found in section 1.
Temporary vs permanent fixturing – what’s the scoop? You may have thought that all tapes and adhesives are permanent, but this isn’t always the case. There are many different applications out there, and not all of them need to be permanent, so there have been adhesives and tapes manufactured for all different applications. What are
Temporary vs Permanent Fixturing Read More »
HQ
Forza
3211 Nebraska Ave,
Suite 300
Council Bluffs, Iowa 51501
Contact
O. 402.731.9300
info@forzabuilt.com
Mon – Fri | 8:00 AM – 4:30 PM CST
Optimization Inquiries
Interested in working with us?
sales@forzabuilt.com
Subscribe to our Newsletter!
